Table of Contents
Advertisement
The wildcard (*) in the second line refers any request with an unspecified domain name
(any request in which the domain name is not present in the HTTP header) to the
default server group
The application switch reads the HTTP header to determine the domain name
format. You cannot configure HTTPS in this way because the header is
encrypted and not visible to the application switch.
Modifying Existing URL Rules and Domains
After a set of domains and pattern rules are put in place, they can be modified or
deleted at any time. Because they are context dependent, you must ensure that you are
in the correct context before modifying the rules.
To configure a domain, for example, you must first enter the virtual service that you
want to modify using the following command:
config service vip 10.65.31.201 port 8080 proto tcp l7 class http
Then you can add new domains, or delete an existing one:
unconfig domain name ebooks.com
If you want to modify another domain inside of the same service, first go into the
domain:
config domain name www.ebooks.com
Then, add or delete pattern rules:
config pattern-rule "comics" server-group-name comics
unconfig pattern-rule "authorsc" server-group-name authorsc
Configuration Example
The following configuration example expands on the examples in Chapter 5 and
Chapter 6. The site
off-load delivery of static images and streaming media from their main servers. One of
the servers is redeployed as a media server.
To use cookies and URLs together, they modify the cookie so that it only applies to part
of their site, and they move all the images from that part of the site.
Px Series Application Switch Installation and Configuration Guide
.
sg2
has grown once again by using URL switching to
yourdomain
Configuration Example
7-9
Advertisement
Table of Contents
