Extreme Networks Px Series Installation And Configuration Manual page 77

Px series application switch
Table of Contents

Advertisement

Configuration Example
config pattern-rule "default" server-group-name yourdomain cookie-name
"session-id" cookie-type learn
config service vip 64.1.2.11 port 443 protocol tcp l7 class https
config domain name default
config pattern-rule "default" server-group-name ecom
#----------------------------------------------------------------
# system configuration
#----------------------------------------------------------------
config system-ip 64.1.1.10 / 24
config default-gateway 64.1.1.1
disable vlan
config mgmt ipaddress 10.10.10.10 / 24 vlan 100
enable vlan
enable syslog
config syslog ip 10.10.10.20
config nat-mode server-only
enable clipaging
disable port gigabit
#----------------------------------------------------------------
# proxy-ip's
#----------------------------------------------------------------
config proxy-ip 64.1.1.11 - 64.1.1.42
#----------------------------------------------------------------
# SNMP configuration
#----------------------------------------------------------------
config snmp sysName "balancer"
config snmp sysLocation "Exodus Colo"
config snmp sysContact "Web Admin"
config add trap receiver 10.10.10.21 "public" 162
config snmp add community readonly "readme"
config snmp add community readwrite "doall"
Px Series Application Switch Installation and Configuration Guide
6-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Summitpx1Pxm

Table of Contents