Table of Contents
Advertisement
• Administrator
An administrator-level account can view and change all switch parameters. It can
also add and delete users, and change the password associated with any account
name. The administrator can disconnect a management session that has been
established by way of a Telnet connection. If this happens, the user logged on by
way of the Telnet connection is notified that the session has been terminated.
If you have logged on with administrator capabilities, the command-line prompt
ends with a (#) sign. For example:
SummitPx1:18#
Changing the Default Passwords
The switch is automatically configured with one account at each level, with the names
and
user
add a password to the default
1 Log in to the switch using the name
2 At the password prompt, press [Return].
3 Add a default password by entering the following:
config account admin
—or—
config account user
4 Enter the new password at the prompt. Passwords can have up to 32 characters, and
are case-sensitive.
5 Re-enter the new password at the prompt.
If you forget your password while logged out of the command-line interface, contact
your local technical support representative, who will advise on your next course of
action.
Px Series Application Switch Installation and Configuration Guide
. By default, these accounts do not have passwords assigned to them. To
admin
admin
account, follow these steps:
.
admin
Configuring Management Access
4-5
Advertisement
Table of Contents
