emoving and opening the carrying case
over
o lift off the carrying case cover, swing
p the carrying handle (K). Then press the
atch (L) and let the lid swing forwards as
r as
it
will go (M). Lift off the carrying
ase cover (N). Again press the catch and
ld down the lid (0). The compartment
ehind it accommodates sewing thread,
ot control and power cord.
nportant: Before you replace the carrying
ase cover, make sure you swing the spool
older forwards (page 2).
Removing and opening the detachable
work support
Reach under the detachable work
support (K) and swing
it
out toward the
left (L). Swing the lid containing the spare
bobbins to the rear (M). Lift the work
support off (N) and open its lid (0) to
accommodate accessories. To place spare
bobbins in the lid, tilt it back (P).
4
1