Threading The Needle; Drawing Up The Bobbin Thread - Pfaff synchrotronic 1229 Instruction Book

Threading the needle
aise the presser bar lifter to the
orizontaI (Stopmatic) position. Place the
ieedle thread under hook K of needle
hreader 4. Push needle threader control 5
lown as far as it will go. Then place the
ieedle thread under hook L of the needle
hreader. At the same time release
ontrol 5 and the thread. The thread is
iow pulled through the needle eye in a
oop. Then pull the thread through the
ieedle eye completely.
Drawing up the bobbin thread
Hold the needle thread a little taut. Push
presser bar lifter 37 down to position L
(page 5) and then up again. As you do so,
the needle moves down and up again and
draws up the bobbin thread. Pull the
bobbin thread out of the needle hole and
lay both threads toward the left and back
under the sewing foot.