Table of Contents
Advertisement
)verlock setting
ttach overlock foot K (top ill.). Leave the
Dot in its lowered position . Turn screw L
ut a few turns. Attach overlock -stitch
ttachmen t so that mountin g ridge M
nters the slot in the needle holder
bottom ill.). Push the attachme nt up as
r as it will go and tighten screw L.
Press overlock button D (top ill.). Set the
needle to the left position and turn the
master selector dial to 4 (bottom ill.). Set
the needle thread tension at 3.
The overlock seam is sewn with the top
feed disengag ed.
Important: The overlock -stitch attach
ment must only be used with the
machine set as describe d on these pages.
Hide quick links:
Advertisement
Table of Contents
