GE JP346 Owner's Manual page 6

Usingthe surface elements.
Throughout this manual, features and appearance may vary from your model
How to Set
I II
Push file lo_ob down and mrn in eifller
direction to the setting you want. _,qlen
the conuol is in any position other than
OFF,it m W be remind without pushing
it down.
At bet1 OFF and HI file control
clicks
into position. You may hear slight
clicking
sounds during cooldng, indicating die
control is keeping the power level you
set.
The controls for file radiant stnfhce
elements can be set anywhere between L0
and HI for an unlimimd number of heat
settings. With the infinite switch the
element wcles on and off to maintain
your selected control setting.
The ON indicator light will glow when
any surface element is on.
A HOTSURFACE indicator light will gk_w
when any radiant element is turned on
and will remain on until the surface is
cooled to approxhnately 150°E
NOTE:
It comes on whenthedement ishot to the
touch.
It staysonevenafter theelementis turnedoff
It glowsbrightly until theelement i s cooledto
approximately 1 50°£
Besureyouturnthecontrolknobto OFF
whenyoufinishcooking.
Never cook directly on the glass.
Always use cookware.
Always center the pan on the surface
element you are using,
About the radiant surface elements..,
The radiant cooktop fe.amres heating
elements behead1 a stoned1 glass surface.
NOTE" A slight odoris normal w hena new
cooktop is usedforthefirst time.It is caused by
theheatingof newpartsandinsulating materials
andwill disappear i n a shorttime.
NOTE"Onmodels with light-colored glass
cooktops, it isnormal f or thecooking zones to
change colorwhenhot orcoolingdown.Thisis
temporary andwill disappear a sglasscoolsto
roomtemperature.
The surface element will cycle on and off
to maintain your selected control setting.
Avoid placing utensils flint could
become hot or plastics that could melt
on the smface element until it has
cooled completely.
Water stains (mineraldeposits)are removable
using the cleaning creamor full strength white
vinegar
iiiiiiiiii:,
Useof windowcleaner m ayleaveaniridescent
filmon thecooktop. T hecleaning creamwill
remove thisdiscoloration.
Don'tstoreheavy itemsabovethecooktop.
If theydropontothecooktop, t heycancause
damage.
It is safe to place hot cookware (flom the
oven or surfhce) on the glass cool<top
when the smface is cool
Even after the surface elements are
turned off; the glass cooktop retains
enough heat to continue cooking. To
avoid overcooking, remove pans flom
the stnfhce elements when the food
is cooked.
}_Donotusethesurfaceasa cuttingboard.
Donot slide
cookware across
thecooktop
because it can
scratch theglass.
Theglassis
scratch-resistant,
notscratchproof
6