Table of Contents
Advertisement
Available languages
Available languages
SUPPLIED
ACCESSORIES
This product
comes
with the following
accessories:
Please
confirm
that they are included.
[]
Owner's
Manual
[]
Remote Control
[] AA batteries x 2
[]
Set Up Guide
(1 EMN20189)
(NE802UD)
(1EMN20190)
NOTE:
If any of these accessories
are missing, please contact your dealer.
[]
Power cable
(WBCO202HO001)
;ERTING THE REMOTE
CONTROL
BATTERIES
1 Remove the back cover of the remote control
while pressing the tab on the back cover down
with your finger.
3 Replace
the back cover
of the remote
control.
2 Insert two AA size batteries, making sure that
the polarities of the batteries match the sym-
bols inside the remote control.
o
©
CONTROLRANGE
NOTE:
• Do not insert a mix of old and new batteries.
• Do not insert a mix of different brands of batteries
or different types of batteries.
• Always use new, fresh batteries as replacement.
• Never attempt to charge, heat, burn or take apart
batteries.
Operate
the remote
control
within
a 30 degree
angle
on both
sides
of the infrared
sensor
on the main
unit. You can operate
the remote
control
from a distance
of several
yards
away from
the main
unit.
NOTE:
Other devices which use infrared beams, sunlight,
fluorescent
lights, etc., may affect the range and
effectiveness
of the remote control
Make sure the
plasma display is positioned
in a place which mini-
mizes interference
from them.
Approximately
5,5 yds (5 m)
k
With in 30 degrees.
'_j
With in 30 degrees
Approximately
_
_i
7.6 yds (7 m)
_-__"
Approximately
5.5 yds (5 m)
Advertisement
Table of Contents
