Setting The Screen Saver - FUNAI F42PDME Owner's Manual

OPERATING THE PLASMA DISPLAY
MENU .....
INPUT SELECT
0
DISPL_
0
You can specify settings for the screen saver and
the background color.
1 Enter the main menu with the MENU button.
2 Select "Detail" on the MAIN MENU screen
with the • / • buttons.
3 Press the I_ button.
The "DETAIL" menu is displayed on the
screen.
Setting the S£reen Saye r
1 Select "Screen saver" on the DETAIL screen
with the • / • buttons.
2
Select the mode with the _1 / I_ buttons.
NOTE:
• There are 3 modes for the screen saver; "Off",
"Slow" and "Fast".
"Slow" moves 1 pixel every 30 minutes and "Fast"
moves 1 pixel every 10 minutes. This prevents
images burning into the screen.
• When a 480i or 1080i input signal connected to
the COMPONENT2 terminal is displayed, the ver-
tical movement is different.
"Slow" moves 2 pixels every 60 minutes and
"Fast" moves 2 pixels every 20 minutes.
3 Press the PREVIOUS button to return to the
MAIN MENU screen.
NOTE:
• Pressing the MENU button cancels the menu.
setting the Backgr#und £#!# r
1 Select "Background" on the DETAIL screen
with the • / • buttons.
NOTE:
• Press the PREVIOUS button to return to the
MAIN MENU. Pressing the MENU button cancels
the menu.
2
Select the mode with the _1 / I_ buttons.
Select "Opaque" or "Translucent" for the back-
ground color.
3 Press the PREVIOUS button to return to the
MAIN MENU screen.
NOTE:
• Pressing the MENU button cancels the menu.