Table of Contents
Advertisement
Setting
the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clock for the correct time of day before using the appliance.
To set the clock:
1.
Press clock once (do not hold key pad down).
2.
Within 5 seconds, press and hold the
A
or
V until
the correct time of day appears in the display.
The clock cannot be changed when the oven is set for
cooking or clean is active.
Changing temperature
display (°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The oven may be
programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
The temperature
display feature cannot be changed
when the oven is set for cooking or clean is active.
To change the temperature
to display °C (Celsius) or
from °C to °F"
1.
Press broil. "----"
appears in the display.
2.
Press and hold the A
until "HI" appears in the
display.
3.
Press and hold broil until °F or °C appears in the
display.
4.
Press the A
or V
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating
mode.
Setting a silent control panel
When choosing a function, a tone will be heard each time a
keypad is pressed. If desired, the control can be
programmed for silent operation.
To blockthe controls from sounding when any keypad is
pressed in the future, press and hold start time keypad for
6 seconds. The control will beep once then release the
keypad.
To return the tones, press and hold start time again for 6
seconds until the control beeps once.
Advertisement
Table of Contents
