Getting Start; Grounding Instructions; Gasconversion - Electrolux E36GC70FSS1 Use & Care Manual

Getting Start
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an
electrical outlet that is correctly polarized and properly grounded.
DO NOT operate the cooktop using a 2-prong adapter or an
extension cord. If a 2-prong wall receptacle is the only available
outlet, it is the personal responsibility of the consumer to have it
replaced with a properly grounded 3-prong wall receptacle installed
by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with this
cooktop for complete installation and grounding instructions.
Grounding
type wall
receptacle
under any
circumstances,cut,
remove,or bypassthe
grounding prong.
J
Power supply cord with
3-prong grounding plug
UQUEFIEDPETROLEUM (PROPANE)GAS CONVERSION
[] ! [] [] [] [] _ [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
This appliance can be used with Natural Gas and Propane Gas. It is shipped from the
factory for use with natural gas.
A kit for converting to LP gas is supplied with your cooktop. The kit is marked "FOR LP/
PROPANE GAS CONVERSION". Follow the installation instructions which are inside the
envelope.
The conversion must be performed by a qualified service technician in accordance with the
kit instructions and all local codes and requirements. Failure to follow instructions could
result in serious injury or property damage. The qualified agency performing this work
assumes responsibility for the conversion.