Download  Print this page

Getting Started; Grounding Instructions; Liquefied Petroleum (Propane) Gas Conversion - Electrolux E36GC75PSS Use And Care Manual

Hide thumbs

Advertisement

6

Getting Started

Grounding Instructions

For personal safety, the cooktop must be properly
grounded. For maximum safety, the power cord
must be plugged into an electrical outlet that is
correctly polarized and properly grounded.
DO NOT operate the cooktop using a 2-prong
adapter or an extension cord. If a 2-prong wall
receptacle is the only available outlet, it is the
personal responsibility of the consumer to have
it replaced with a properly grounded 3-prong wall
receptacle installed by a qualified electrician.
See the INSTALLATION INSTRUCTIONS
packaged with this cooktop for complete installation
and grounding instructions.
This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug.
Avoid fire hazard or electrical shock. DO NOT use an adapter plug, an extension cord, or remove grounding prong from
electrical power cord. Failure to follow this warning can cause serious injury, fire or death.
Liquefied Petroleum
(Propane) Gas Conversion
This appliance can be used with Natural Gas and
Propane Gas. It is shipped from the factory for use
with natural gas.
A kit for converting to LP gas is supplied with your
cooktop. The kit is marked "FOR LP/PROPANE
GAS CONVERSION". Follow the installation
instructions which are inside the envelope.
The conversion must be performed by a qualified
service technician in accordance with the kit
instructions and all local codes and requirements.
Failure to follow instructions could result in serious
injury or property damage. The qualified agency
performing this work assumes responsibility for the
conversion.
Grounding
type wall
receptacle
Severe shock, or damage to the cooktop may occur if the
cooktop is not installed by a qualified installer or electrician.
Any additions, changes or conversions required in order for this
appliance to satisfactorily meet the application needs must be
made by a qualified service technician in accordance with the
manufacturer's instructions and all codes and requirements of
the authority having jurisdiction. Failure to follow the instructions
could result in serious injury or property damage. The qualified
agency performing this work assumes responsibility for the
conversion.
Do not, under any
circumstances, cut,
remove, or bypass
the grounding
prong.
Power supply
cord with 3-prong
grounding plug

Advertisement

loading