Advertisement
Table of Contents
Operating
instructions
Cycle
Options
Suitable
options will automatically
be indicated
when the cycle is selected.
To add options,
press the corresponding
options
buttons to illuminate the selections desired. To
delete options,
press the options buttons again
and the indicator lights will turn off.
To protect your fabrics, not all options are avail-
able with every cycle. If an option is not appropri-
ate for the cycle, it will not be displayed. Occa-
sionally, two options in the same cycle will conflict
with each other, like line dry and anti static. When
this happens, the option selected first will cause
the conflicting option to not be selectable.
All options selected for the cycle, except sanitize
and add steam, will be remembered and recalled
each time that cycle is selected in the future. To
prevent unintentional and accidental exposure of
delicate material to sanitize heat or unexpected
steam, the sanitize option and the add steam
option will not be remembered and must be rese-
lected each time.
EXTENDED TUMBLE
Select the extended
tumble option if the dried
load might not be removed promptly at the end of
the cycle. The dry load will tumble continuously
without heat for 30 minutes. EHT. TUMBLE
will be
displayed and a chime will sound periodically to
remind you to remove the dried load.
LIGHT (press & hold)
The drum light will come on whenever the door is
opened to illuminate the drum during loading and
unloading. Closing the door turns off the light. The
drum light will automatically turn off if the door is left
open more than 3 minutes.
You can activate the drum light during a cycle by
pressing and holding the extended tumble button.
The light will stay on during the cycle for 3 minutes.
To turn it off, press and hold the button again.
DELAY START
Press delay start to select a drying time conve-
nient to your schedule or during off peak energy
hours. The delay time selected will be displayed
and begin counting down when you select start.
CHIME (press & hold)
A signal will sound at the end of the cycle (and
periodically during extended
tumble) if this option
is selected.
ADD STEAM
The add steam option injects steam into the cloth-
ing prior to cool down to reduce wrinkling, ironing
and static cling.
ANTi STATIC (press & hold)
The anti static option injects steam into the cloth-
ing just before cycle completion to reduce static.
LINE DRY
Select this option to simulate hanging your laundry
in a summer breeze combined with the wrinkle-
releasing benefits of tumble action. Since drying
times are calculated with the dryer's automatic
moisture sensors and heat is radically reduced
or eliminated, cycle time will be lengthened. As
a result, depending on moisture content of load,
overall energy consumption
decreases.
SHRINK GUARD
Select shrink guard to lower the initial drying tem-
perature to protect fabrics from overdrying.
CONTROL LOCK
To lock the controls between cycles, press and
hold the control
lock button for 5 seconds. Re-
peat to unlock the controls when you are ready to
operate the dryer. Use this feature to reduce the
likelihood of accidental operation by children.
ECO FRIENDLY
The eco friendly option reduces the drying tem-
perature a few degrees to save energy. In conjunc-
tion with automatic moisture sensors, cycle times
will increase slightly, but overall energy usage will
decrease.
Advertisement
Table of Contents
