To Replace Belt - Kenmore 721.23195 Owner's Manual

4, Carefully insert and _i_scr_driver at each
brush support to free brush from base.
Base
Suppo_
5. Remove worn belt.
6. Slide brush supports off to check and
clean brush suppo_ areas. See PARTS
LIST for picture of compliete brush
assembly.
TO REPLACE BELT:
i. install brush supers onto br_i
Brustl su_o_
2. lns talli new belt in belt groove on the
brush, then over the fan shaft. IBesure belt
is be_een the belt guards.
Fan Sha_
BeR Groove
3. _nse_ each sup_rt into its base slot.
4. Push cover and base together.
-!2-