Use And Care; How Your Vacuum Works; How To Start Your Vacuum - Kenmore 721.23195 Owner's Manual

The vacuum cleaner creates suction that
picks up di_, Rapidly moving air carries
the dirt to the dust bag _rough the air
flow passages:, The dui_ bag lets the air
pass through, while it traps the diR For
best c_eaning results, keep the airflow
passage o_n. Check the starred areas
occasionally for clogs. Unplug from
outlet _fore checking.
NOTE: Do not stand canister _dy on its
end while operating or you will bbck the
exhaust vents.
Personal Injury a_ Pr_uct Damage
, DO NOT plug in if switch is, in ON
_sition. Per_nal injury or damage
could result,
• De cord moves, ra_dly when rewinding.,
Keep _ildren away and provide a clear
_th when rewinding the _,rd to prev_t
_r_nal injury,
, DO NOT use outl_s a_ve _unters.
Damage to items in surrounding area
could occur,
1. Pull out the power cord to the desired
_ength,_
NOTE: To reduce the risk of electric shock,
• is vacuum cleaner has a polarized p4ug;
one blade is wider than the other. This plug
will fit in a _larized outlet only one way. if
the plug does not fit fully in the outlet,
reverse the #ug, If it still does not fiL _nta_
a qualified electrician to install the proper
outlet. Do not change the plug in any way.
2. Plug the _lariz_ _wer cord into a 120
Volt outlet iocat_ near the floor,
To rewind: Unplug the cleaner, Hold the
plug while rewinding to prevent damage or
injury from the moving cord. Press on the
cord ree! _J_on to rewind the oord,
3. To start, _sh slide switch down toward
MAX To _op, raise slide up to OFF.
-6-