Kenmore Power-Mate 1162395490 Owner's Manual page 6

Before assembling your vacuum cleaner, be sure you
have all parts shown on pages 3 and 4.
Eiec#fical _ock Hazard
Do not plug into elec#ical supply un#il assembly is
compie#e. Failure to do so could resu# in elec_cal
shock or injury.
o Slide wands
together until wand
button snaps into
place. Turn wand
button to the slotted
area of the wand "
swivel.
The swivel allows you
to turn the handle to
the teft side to reach
farther under low
furniture,
Button
m
Wand
Swivel
I. Insert wands into POWERoMATETMuntil the wand
buttons snaps into place.
Raised Area
(if Present}
To remove: step
on wand release
pedal, then puii up
on wands.
2. Connect
POWER-MATE TM
plug and cord as
shown. Do not
force. Raised area
of plug must be
toward hand.
I
Wand
Swivel
Wand
Handle
_Wand
Button
Wand Quick
Release
Pedal
CAN
1. Open the canister hood.
2o Check the dust bag. See
page t 1 for installation
instructions,
& Check motor safety filter.
See page 12 for installation
instructions,
Motor Safety Filter
POWER-MATE
5