Complete Installation - Crosley CAH8WRR0 Use & Care Manual

Through-the-wall installation
1. Insert cabinet into the framed wall opening.
The top of the cabinet should extend 1/2"(13 mm) into the
room. If there is trim, the cabinet should extend 1/2"(13 mm)
past the trim.
B
A i ...............
A. ½" (13 mm) extending into room
B. Trim
2. Use a level to check that cabinet is level side to side.
A. Level
3.
4.
5.
Check that air conditioner cabinet is tilted to the outside so
that water will run to the outside.
Reuse the insulation to seal opening between cabinet and
frame.
Use existing holes and 6 - #8 x 1/2"wood screws (not
provided) to attach cabinet to frame.
NOTE: Do not overtighten screws or cabinet will distort and
provide a poor air seal between cabinet and air conditioner.
6. Caulk all outside wall openings around cabinet.
Electrica_ Shock Hazard
Connect green ground wire to ground screw.
Failure to do so can reeutt in death or
etectrica_ shock.
3. Connect green ground wire to cabinet base with ground
screw. Position ground wire pointing straight up. Put excess
ground wire between coil and air conditioner cabinet.
4.
A. Greenground wire
B. Ground screw
Install foam seal in the gap between air conditioner base and
cabinet. Push foam seal in at the sides and trim any excess
material.
NOTE: Handle air conditioner with care.
1. Make sure the free end of the ground wire is outside of the
cabinet.
A. Foam seal
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
2. Insert air conditioner into cabinet.