Advertisement
INSTALLATION INSTRUCTIONS
CAUTION
To avoid risk of personal injury, property damage, or product damage due to the weight of this device
and sharp edges that may be exposed:
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are
needed to move and install the unit.To prevent injury or strain, use proper lifting and carrying
techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of
the unit over.
Handle air conditioner with care. Wear protective gloves whenever lifting or carrying the unit. AVOID
the sharp metal fins of front and rear coils.
Make sure air conditioner does not fall during installation.
Tools and Parts:
Gather the required tools and parts before starting installation. Read and follow the instructions
provided with any tools listed here.
Flat-blade and Phillips screwdrivers
Level
Through-the-wall Installation:
In addition to the tools listed above, the following tools are needed for through-the-wall installation.
Saw
1 (2.5 cm) or thicker lumber
Parts Supplied:
Check that all parts are included in parts package:
Hardware
round - head screws
TOOLS NEEDED
TOOLS NEEDED
pan - head
Phillipsscrews
or
1 2
pan - head
Phillips screws
side curtains
Remote Control
Tape measure
Drill and 3/16 , 1/8 , 3/32 , or smaller drill bit
Caulk
#10 X 1 wood screws (7)
Qty.
3
7
5
2
1
4
Hardware
Top channel
Window sash seal
Foam seal
Window lock bracket
Safety Lock
(for Vinyl-Clad window)
weather seals
Remote Battery
Qty.
1
1
1
1
2
5
2
Advertisement
