Location Requirements - Crosley CAH8WRR0 Use & Care Manual

IMPORTANT: Observe allgoverning codes a ndordinances.
Check t helocation w here a irconditioner willbeinstalled. Proper
installation isyour r esponsibility. Make sure youhave everything
necessary forcorrect installation.
The location s hould p rovide:
• Grounded electrical outlet w ithin 4 ft (122 cm) o fwhere t he
power cordexits theairconditioner.
NOTE: Donotuse anextension cord.
• Free movement ofairinroom tobecooled.
• Alarge enough o pening f ortheairconditioner.
• Adequate wall s upport forweight ofairconditioner. Air
conditioner weighs between 80and110 Ib(36.3 to49.9kg).
NOTE: Cabinet louvers m ust n otbeobstructed. Airmust b eable
topass freely t hrough t hecabinet louvers.
A. Cabinet louvers
Window installation (on some models)
Window opening measurements:
• Width: 27" (68.6 cm) minimum to 40" (101.6 cm) maximum.
• Height: 161/4 '' (41.3 cm) minimum.
r-
__A__t_
B
A. 27" (68.6 cm) minimum to 40" (101.6 cm) maximum
B. 16_" (41.3 cm) minimum
Through-the-wall installation
The wall opening measurements should be:
• Height: 16" (40.6 cm) plus twice the thickness of wood used
to build frame.
• Width: 22%" (57.5 cm) plus twice the thickness of wood used
to build frame.
C
t
C
A. 16" (40.6cm) C. Wood thickness
B. 22_" (57.5 cm)
E_ectrica_ Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or etectrica_ shock.
Ground wire must be connected to ground screw located in lower
right corner of air conditioner when air conditioner is in cabinet.
The electrical ratings for your air conditioner are listed on the
model and serial number label. The model and serial number
label is located behind the front panel on the front flange above
the coil area.