Crosley CAW12444XW2 Use & Care Manual page 9

7, Select wash temperature
TEMPERATURE
WARM
9, Press START/PAUSE to begin wash
cycle
START
Hold 3 sec
PAUSE to cancel
Once you select a cycle, select the desired wash temperature
by turning the Temperature knob to the desired setting.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your garments.
Not
Some cold water is added to save Whites and pastels
energy. This will be cooler than Durable garments
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Cool
Bright colors
Moderate to light soils
Warm water is added to assist in Colors that bleed
soil removal and to help dissolve or fade
detergents. Light soils
Cold
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
Press the START/PAUSE button to start the wash cycle.
Filling is delayed for several minutes while load balance is
sensed. When the cycle has finished, the DONE indicator will
light. Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add garments:
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/PAUSE again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.
Delay in water fill
Filling is delayed for 2 to 3 minutes to check for load
unbalance. You will hear the hum of the spin prior to filling.
This is normal operation.
8, Select cycle options, if desired
EXTRAR_NSE PRO-CLEAN
If you would like to add an Extra Rinse and/or use the
Pro-Clean option, turn the knob for that feature to ON.