Crosley CAW12444XW2 Use & Care Manual page 5

RINSE
CYCLE STATUS
Sensing Wash Rinse Spin Done
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. You may hear the motor turning
on briefly (short hum) to move the basket while filling. Fabric
softener will be added if the Fabric Softener option was
selected. Some cycles will use a spray rinse.
SPiN
CYCLE STATUS
Sensing Wash Rinse Spin Done
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin speed.
LID LOCKED
To allow for proper load sensing and
spinning, the lid will lock and the Lid
Locked light will turn on. This light
indicates that the lid is locked and
cannot be opened.
If you need to open the lid, press
START/PAUSE. The lid will unlock
once the washer movement has stopped.
This may take several minutes if the load
was spinning at high speed. Press
START/PAUSE again to resume the cycle.
Avoid opening the lid during sensing.
The sensing process will start
over when the washer is restarted.
O
Lid Locked
START
Hdd 3 sec
PAUSE to cancel
DONE
CYCLE STATUS
Sensing Wash Rinse Spin Done
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.