Crosley CAW12444XW2 Use & Care Manual page 15

TROUBLESHOOTING
f First try the solutions suggested here or visit our website at www.whirlpool.com/help -_
for assistance and to possibly avoid a service call.
Solution
Add an Extra Rinse to the selected cycle. Sand, pet hair, lint, etc.
on load after washing
Load is tangling
Heavy sand, pet hair, lint, and
detergent or bleach residues
may require additional rinsing.
Washer not loaded as recommended.
See "Using Your Washer" section.
Select a cycle with a slower wash action and spin speed;
however, items will be wetter than those using a higher
speed spin. See the "Cycle Guide" to match your load with the
best cycle.
Load garments in loose heaps evenly around the washplate.
Do not load garments directly over the center of the washplate.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Not cleaning or Wash load not completely Washer senses load size and adds correct amount of water.
removing stains covered in water. This is normal and necessary for clothes to move.
Added more water to washer. Do not add more water to washer. Adding water lifts the
garments off the washplate, resulting in less effective cleaning.
Washer not loaded as recommended.
Load garments in loose heaps evenly around the washplate.
Do not load garments directly over the center of the washplate.
Add only 1 or 2 additional garments after washer has started.
Adding detergent on top of load. Add detergent, oxi products, and color-safe bleach to the
bottom of the basket before adding the load items.
Not washing like colors together. Wash like colors together and remove promptly after the cycle is
complete to avoid dye transfer.
Not using HE detergent or using too
much HE detergent.
Not using correct cycle for fabric type.
Not using dispenser or Downy BalP.
The suds from regular detergent can keep washer from
operating correctly.
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow manufacturer's directions
based on load size and soil level.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
If using Quick Wash cycle, wash only a few items.
Use Super Wash and Heavy cycle for tough cleaning. See the
"Cycle Guide" to match your load with the best cycle.
Use dispenser for chlorine bleach and Downy BaIP for fabric
softener to avoid staining.
Load dispenser before starting a cycle.
Do not add products directly onto load.
Not selecting Fabric Softener - On. Always select "On", when selecting Fabric Softener option.
Cycles that use spray rinsing will add additional water for proper
fabric softener dispensing when "On" is selected.
Incorrect dispenser Clogged dispenser. Use only liquid chlorine bleach in the bleach dispenser.
operation
15