Unpacking; Power Source - Crosley Director CR2405A Instruction Manual

Unpacking Power Source
1
2
3
4
5
6
7
8
9
Remove packing materials from unit.
NOTE: Save all packing materials.
Remove plastic bag covering radio.
Remove plastic safety cover from A/C plug.
Remove tie from A/C cord and untie antenna
wire on back of radio.
Open lid and remove styrofoam shipping
material from turntable.
Remove black tie-wrap from under the tone
arm.
Remove tape and white protective needle cover
by gently pulling down off the tone arm.
Turn the TURNTABLE SUSPENSION SCREW
(28) clockwise until it is all the way down.
Do not force or over tighten it. This allows the
turntable to float on its shock absorbers.
Release tone arm hold down clip by gently
pushing to the right. This will unlock tone arm
from its arm rest. Re-lock the hold down clip
when moving the unit to another location.
Unwind the AC POWER CORD (42) at the back
of the unit and connect it to a power outlet.
2
Plug A/C cord into appropriate outlet.
3
This product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature, If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact you electrician to
replace your obsolete outlet. Do not defeat the
purpose of the polarized plug.
Headphones Jack Operation
1
Connect headphones to the Headphone Jack (13)
2
Adjust volume to the desired listening level.
NOTE: When using headphones, the sound to the unit
speakers will be cut off.
__ Headphone Jack(13)
--®
The sound from all speakers is cut off.
NOTE: Headphones not included with unit.
4