Getting Started; Unpacking; Power Source; Headphone Jack Operation - Crosley Dansette II Bermuda CR6233A Instruction Manual

Unpacking

1 Remove packing materials from unit.
Note: Save all packing materials.
2 Remove plastic bag covering unit.
3 Remove AC ADAPTER(14)from packing.
4 Remove tie from AC ADAPTER(14).
5 Open lid and remove styrofoam shipping
material from TURNTABLE(4).
6 Remove black tie-wrap from under the
TONE ARM (1).
7 Remove white protective needle cover by
gently pulling towards the front of the unit.
8 Release tone arm HOLD DOWN CLIP (2) by
gently pushing to the right. This will unlock
TONE ARM (1) from its arm rest. Re-lock
the HOLD DOWN CLIP (2) when moving the
unit to another location.

Getting Started

1 Untie the wire on the AC ADAPTER (14).
2 Plug the AC ADAPTER (14) into appropriate
3 Plug the small end of the adapter into the
1 Connect headphone to the Headphone Jack
2 Adjust volume to the desired listening level.
NOTE: When using headphone, the sound from
the unit speakers will be cut off.
NOTE: Headphone not included with unit.

Power Source

wall outlet.
DC JACK (13) on the back of the unit.

Headphone Jack Operation

(10).
Headphone Jack