Getting Started; Unpacking; Power Source - Crosley CR6007A Instruction Manual

Unpacking

1 Remove packing materials from unit.
Note: Save all packing materials.
2 Remove plastic bag covering radio.
3 Remove AC Adaptor from Packing.
4 Open lid and remove styrofoam shipping material
from turntable.
5 Remove black tie-wrap from under the tone arm.
6 Remove white protective needle cover by gently
pulling towards the front of the unit.
7 Install the top lid onto the unit.
SETUP
1 Untie the wire on the AC Adaptor.
2 Untie the FM antenna and allow it to hang down
in a straight line for optimum FM reception. If
you have trouble tuning a FM station, move the
external FM antenna for best reception. Do not
connect FM antenna to outside antenna.

Getting Started

1 Flip the LID LOCK HINGE towards the back of
2 Position LID over the turntable and press the lid
3 As you press the lid into place, align the PIVOT
4 Press the LID all the way in until the PIVOT PINS
Lid Installation
the unit.
onto the LOCK HINGE as shown below.
PINS on the LID with the LID PIVOT POINTS as
shown below.
snap into the LID PIVOT POINTS and the LOCK
HINGE clicks into place.

Power Source

1 Plug the AC Adaptor into appropriate wall outlet.
2 Plug the small end of the adaptor into the AC
ADAPTOR JACK on the back of the unit.
click
4