Getting Started; Unpacking; Power Source - Crosley Traveler Turntable CR49 Instruction Manual

Getting Started

Unpacking

1
Remove packing materials from unit.
Note: Save all packing materials.
2
Remove plastic bag covering radio.
3
Remove plastic safety cover from A/C plug.
4
Open lid and remove styrofoam shipping
material from turntable.
5
Remove black tie-wrap from under the tone
arm.
6
Remove white protective needle cover by gently
pulling towards the front of the unit.
Set Up
1
Plug A/C adapter into appropriate outlet.
Note: This product may be equipped with a
polaized alternating-current line plug (a
plug having one blade wider than the
other.) This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the
plug fully into the outlet try reversing the
plug, if the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.

Power Source

Unwind the A/C power adapter (located in a
white box inside the packaging foam). Connect
the small end of the adapter to the back of the
turntable. Connect the other end to an A/C power
outlet.
A/C adapter
4