Do you have a question about the Director CR2405A and is the answer not in the manual?
Questions and answers
Denise B Montgomery
March 24, 2025
where is the standby button located
1 comments:
Mr. Anderson
May 14, 2025
The exact location of the standby button on the Crosley Director CR2405A is not specified in the provided context.
This answer is automatically generated
Ruth Williams
February 23, 2025
When I play the CD, radio & record player the sound goes down then up. Doesn't stay at one leval.What can I do so I can play my music.
1 comments:
Mr. Anderson
May 14, 2025
To fix the sound level issue on the Crosley Director CR2405A when playing CDs, radio, and records, adjust the volume to the desired listening level using the volume control. For each mode (CD, radio, or record), ensure the unit is set to the correct function mode using the FUNCTION button, and check that the media is properly inserted or set up (e.g., CD inserted label side up, correct speed set for records).
This answer is automatically generated
Linda funston
January 29, 2025
Is in stand by mode how do get off
1 comments:
Mr. Anderson
February 10, 2025
Press the Standby button to turn off standby mode on the Crosley Director CR2405A.
Page 1
Director instructionMaflua| www. c ros Ieyrad io. corn...
Page 2
I PO TANT SAFETY I ST UCTIO PLEASE READ CAREFULLY FOLLOWING iMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT Read instructions - All the safety and operating instructions should be read before the product is operated. Retain instructions - The safety and operating instructions should be retained for future reference.
Page 3
WARN ING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUT O CAUTION: TO REDUCE The lighting flash with The exclamation...
Thank you for purchasing the Crosley Director Getting Started (CR2405A). Before operating this unit, please read this manual thoroughly and retain it for future Unpacking ......... reference. Power Source ......Control Locators ....... Basic Operation Instructions in this manual describe the control functions of the CR2405A.
Unpacking Power Source Unwind the AC POWER CORD (42) at the back Remove packing materials from unit. of the unit and connect it to a power outlet. NOTE: Save all packing materials. Plug A/C cord into appropriate outlet. Remove plastic bag covering radio.
Unit Controls Speakers Function Button (CD/PHONO/RADIO/AUX) .... 16 Erase Button _R4)-_4EE_ Band Button(AM/FM) Finalize Button 27 26 25 24 23 Track Split Button Record Button Backward Skip Line In Jack CD Drawer Forward Skip Stop Button• Headphone Jack Play/Pause I_11 Power Button Find Button Eject Button...
Page 7
Aux In Jack AUDIO Audio Output Jack AC Power Cord External antenna Adapter For 45 rpm Records • • • • • • OOOOOOOOOO OOOOOO' OOOOOO' OOOOOOOOOO OOOOOOO, OOOOOOOOOO OOOOOOO, OOOOOOOOOO OOOOOOO, oooooooooo oooooooooo oooooooooo oooooooooo oooooooooo oooooooooo oooooooooo Power Button Eject Button 43---f_ Program...
General _-_,Ant:enna Make sure the unit is plugged in correctly to an Antenna: for FM reception, the unit is provided with AC outlet. a FM WIRE ANTENNA (43), move the wire until the reception is clear and with no interferences. AM reception, the unit is provided with a directional...
Turntable Operation _---(_Playing a Cassette Press the FUNCTION button (2/68) to set the While in Phono mode, press unit to Phono mode. STOP/EJECT(35) button on the cassette player to open the cassette door. Set the SPEED CONTROL SWITCH (32) to the correct speed (331/3,...
Playing a CD Random Play Press the FUNCTION button (2/68) to set the While playing a CD, press the RANDOM button unit to CD mode. (48) on the remote control. "Rand" will show on the LCD display. The unit will randomly select songs from the CD.
.Playing lVIP3CD's Search Play This unit will play CD's recorded in MP3 format. MP3 CD's normally contain many files. By using the the controls and functions work the same as a regular search features described below, you can easily and CD.
Recording Operation Recording Cassettes to Preparation This unit is designed to record CD-R and CD-RW Load a compatible blank CD-R or CD-RW into discs bearing the identification logo "Compact Disc the unit. Recordable" or "CD-Rewritable". If CD's do not conform to this standard, they may not record properly.
Manual Track Division - iErasing a CD-RW If using a CD-RW, you can erase the whole CD and You can divide your recording into separate tracks rerecord it. Erase procedures are only possible with if you wish. By doing this, each song will have CD-RW discs.
Audio Connections Audio Output Aux Input Using the Aux Input allows you to hook up additional external audio components and listen to them through AUX IN your unit. Any component with an audio output such as a Tuner, can be connected by using the correct cables...
Troubleshooting There is no power Make sure the radio is plugged in correctly. Check to make sure the unit is not in Standby mode by pressing the Standby button. There is no sound Check the volume level by turning the volume knob.
Please include a check or money order in the amount of $19.95, made payable to Crosley Radio, to cover handling and return shipping charges. Returned products will not be shipped to PO Boxes. Crosley Radio will not be responsible for delays or unprocessed...
Need help?
Do you have a question about the Director CR2405A and is the answer not in the manual?
Questions and answers
where is the standby button located
The exact location of the standby button on the Crosley Director CR2405A is not specified in the provided context.
This answer is automatically generated
When I play the CD, radio & record player the sound goes down then up. Doesn't stay at one leval.What can I do so I can play my music.
To fix the sound level issue on the Crosley Director CR2405A when playing CDs, radio, and records, adjust the volume to the desired listening level using the volume control. For each mode (CD, radio, or record), ensure the unit is set to the correct function mode using the FUNCTION button, and check that the media is properly inserted or set up (e.g., CD inserted label side up, correct speed set for records).
This answer is automatically generated
Is in stand by mode how do get off
Press the Standby button to turn off standby mode on the Crosley Director CR2405A.
This answer is automatically generated