Turntable Operation; Cassette Operation - Crosley Director CR2405A Instruction Manual

Turntable Operation _---(_Playing a Cassette
1
2
3
4
Press the FUNCTION button (2/68) to set the
unit to Phono mode.
Set the SPEED CONTROL SWITCH (32) to
the correct speed (331/3, 45 or 78 rpm) for the
selected record.
Use the CUE LEVER (30) to raise the tone arm
off its rest. Move the tone arm over the record
and use the cue lever to lower it to the point
you want the record to start.
At the end of the record, the tone arm will return
to its rest.
NOTE:The turntable and cassette players both
operate in the same mode. Make sure
the cassette player is in STOP mode
when listening to a record.
_Access0ry: A DAPTER FOR 45RPM__
To play the 45rpm record, place the ADAPTER (44)
on the spindle.
While in Phono mode, press the
STOP/EJECT(35) button on the cassette player
to open the cassette door.
2
Insert a prerecorded cassette tape into the
cassette door.
3
Press the PLAY button (38) to begin play.
4
To stop playback, press the STOP/EJECT (35)
button.
5
Press the STOP/EJECT (35) button again to
eject the cassette.
-_To Fast Forward or Rewind
While playback is stopped, press the FAST
FORWARD (36) or REWIND (37) button to fast
forward or rewind the cassette.
2
Once the desired position is reached on the
cassette, press the STOP/EJECT (35) button
to stop the cassette.
3
Press the PLAY (38) button to begin play.
NOTE: The cassette player plays the side of the
cassette facing away from the unit. To
play the other side of the cassette, you
must eject the cassette and turn it over.