Crosley CRG3480LSD Use & Care Manual page 18

Setting a self=clean cycle or a delayed
start self=clean cycle
To start a self-clean cycle immediately without a delay,
skip steps 2 & 3 in the instructions provided below.
Setting self-dean cycle
1. Be sure the clock displays the correct time of day.
2. Press Start time. The "=" in the time of day will flash.
3. Press and hold the A pad to scroll to the time to start
the delayed self-clean cycle. Release the pad when the
desired time is displayed.
4. Press Clean. "===" appears in the display.
5. Press the A or V pad once. "3:00"will appear in
the display indicating that a 3 hour self-clean time is
set. To change to a 2 hour self-clean time press
V once (2:00 appears in the display).
(Some models) For a 4 hour self-clean time press
A until (4:00 appears in display).
.
"CLn" will appear in the display during the self-clean
cycle and the "Door Locked" indicator light will glow
until the self-cleaning cycle is complete or cancelled
and the oven temperature has cooled.
To avoid possible burns use care when opening the oven
door after the self-cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or
steam to escape.
DO NOT force the oven door open. This can damage the
automatic door locking system. Use caution and avoid
possible burns when opening the door after the self-
clean cycle is finished. The oven may still be VERY HOT.
When the self-dean cycle is finished=
1. The time of day will appear in the display window and
the"Clean" and "Door Locked" indicator lights will
continueto glow.
2. Once the oven has cooled down for about 1 HOUR and
the "Door Locked" indicator light is OFF, the oven door
can be opened.
Stopping or interrupting a self=clean cycle
If it becomes necessary to stop or interrupt a self=
cleaning cycle once it has been activated
1. PressClear/Off.
2. Once the oven has cooled down for about 1 HOUR and
the "Door Locked" indicator light is OFF, the oven door
can be opened.
3. Restart self-clean cycle once all conditions have been
corrected.
As soon as the controls are set, the motor driven lock
will begin to close automatically and the "Door Locked"
indicator light will flash. DO NOTopen the oven door
while the light is flashing (allow about 15 seconds for the
oven door to lock).
Whenever the self-clean feature is active you may check
the amount of time remaining by pressing the Clean key
pad. Remember the oven door cannot be opened until
the range has cooled sufficiently. You will need to add
about 1 hour to the time displayed before you can
use the oven for cooking.
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.