Kenmore 3639644284 Owner's Manual page 14

Reversing Door Swing (cont n0ed)
Transferring the top hinge
Reinstall the top hinge (and shim glued to it) on the left
front corner of the cabinet but do not tighten the screws at
this time
Transferring door handles
(on models so equipped)
Fresh food door
To remove the handle...
(a) Remove the handle
plug using a tape-tipped
putty knife under the
edge, and remove the
screw underneath
(b) Remove two screws
holding the handle to the
top of the door
(c) Remove the handle
Aher removing the handle°..
(a) Remove the screws Plug
from the right edge of the Button
door top and insert them
onto the handle screw
holes on the opposite side
(b) With tape-tipped putty Handle Holes
knife or thin-blade
screwdriver, pry out the
plug button from the hinge
hole on the left side of the
door and insert it into the
hole on the opposite side
that was vacated by
removal of the top hinge
(c) Pull the plug button from the front of the door and
transfer it to the opposite side
Plug
Button -'-'1
(d) Transfer the door stop
LEFT SIDE , Door Stop
R_GHT SIDE
- Move the metal door stop from the right side to the left
side Use a Torxdriver
. Move any screws from the left side to the right side
When reinstalling the fresh food door handle.._
• Attach the handle to the right side of the door with
screws at the top and under the handle plug
- Reinstall the handle plug
Freezer door
(a) Remove the screw
holding the handle to the
top of the door and the
two screws holding the
handle to the bottom of
the door
(b) Remove the handle
(c) Remove the screw
from the right top edge
of the door and insert it
into the handle screw
hole on the left side
(d) Transfer the door
stop as shown above
(e) Attach the itandle to
the right edge of the door with screws at top and
bottom, using bottom holes vacated by removal
of the door stop screws
I4