Grounding Instructions; Liquefied Petroleum (Propane) Gas Conversion - Kenmore 790.32092401 Use & Care Manual

Grounding instructions
For personal safety, the cooktop must be properly grounded, For maximum
safety, the power cord must be plugged into an ebctrbal outbt that is
correctly polarized and properly grounded,
DO NOT Operate the cooktop using a 2°prong adapter or an extension cord,
If a 2°prong wall receptacle is the only available outlet, it is the personal
responsibility of the consumer to have it replaced with a properly g rounded
3-prong wall receptacle installed by a qualified electrician,
See the INSTALLATION INSTRUCTIONS packaged with this cooktop for
complete installation and grounding instructions,
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly intoa properly grounded receptacle, DO NOTcut or remove the
grounding prong from this plug,
Grounding type
wall receptacle
Do not, underany _
circumstances, /
cut, remove, or /
bypass the |
grounding prong. /
Power supply cord with
3-prong grounding plug
Avoid fire hazard or electrical shock,
DO NOT use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord,
Failure to follow this warning can cause serious injury,
fire or death,
Liquefied Petroleum (Propane) Gas Conversion
This appliance can be used with Natural Gas and Propane Gas, it is
shipped from the factory for use with natural gas,
if you wish to convert your cooktop for use with propane gas:
Models with Venturi (open) Burners, see the Installation instructions
for the conversion instructions,
Models with Sealed Burners, use the instructions in the envelope
attached, marked "FOR LP/PROPANE GAS CONVERSION",
The conversion must be performed by a qualified service technician in
accordance with the manufacturer's instructions and all codes and
requirements of the authority having jurisdiction, Failure to follow
instructions could result in serious injury or property damage, The
qualified agency performing this work assumes responsibility for the
conversion,
the cooktop, may occur if the cooktop is not converted
by a qualified installer or electrician,
required in order for this appliance to satisfactorily
meet the application needs must be made by an
authorized Sears Service Center, Distributor or
Qualified Agency,