Setting The Clock - Kenmore 790.46992 Use & Care Manual

Setting the
Clock
FEATURE OVERVIEW
• To Set the Clock
• To Set the Minute Timer
NOTE: The oven function
will not work if the time of
day clock is not set.
€_ _3SEC
O OVEN
PREHEAT
DOORLOCKED
Note: The oven function will not work if the time of day clock is not set.
To Set the Clock
When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash
"12:00 ".
1. Push CLOCK SET pad _.
2. Within 5 seconds, push and hold the UP A or DOWN ARROW pad v until the correct time of day appears in the
display.
Note: The clock cannot be changed during any timed bake or self-clean cycle.
To Set the Minute Timer
1. Push TIMERON/OFF pad _.
2. Push the UP ARROW pad ^ to increase the time in one minute increments. Push and hold the UP ARROW pad .-. to
increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and
59 minutes.
.
4.
Note: If you push the DOWN ARROW pad v first, the timer will advance to 11 hours and 59 minutes.
The display shows the timer count down in minutes until one minute remains. The display will count down in seconds.
When the set time has run out, the timer will beep 3 times. It will continue to beep 3 times every 60 seconds until the
TIMER ON/OFF pad _ is pushed.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set
time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in
use with any other mode, the minute timer will be shown in the display. To view other functions, push the function pad for that
mode.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, push and hold the UP ^ or DOWN ARROW pad v to increase or
decrease the time.
To Cancel the Minute Timer before the set time has run out :
Push TIMER ON/OFF pad _.
10