Kenmore 911.40465 Owner's Manual page 15

OPERATION
Setting Special Features
Your control will allow you to lock the
touch pads so they cannot be activated
when pressed. If you're worried about
leaving the oven unsupervised, activate
this feature.
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF,
2. (a) Press the CLEAN pad. The
display shows LOC OFF (lockout
off),
(b) Press the CLEAN pad again.
The display will show LOC ON
(lockout on)
3. Press the START pad.
This feature can only be set
when the oven is not in use,
When this feature is on, the display will
show LOC, if a touch pad is pressed.
(This feature will not affect the Clock,
Timer or Oven light pads.)
1
(a) Press the OVEN COOKING
TIME pad, The display will show
HLd OFF.
(b) Press the OVEN COOKING
TIME pad again to activate the
feature The display will show HLd
ONo
3, Press the START pad.
This special feature will allow you to
change the speed; #1 means speed of
change is slow up to #5 which means
speed of change is fast. To set the
speed you prefer, follow these steps:
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF
2. Press the UP arrow pad., The
display will show the current set
speed.
3. Press the UP arrow to increase the
speed up to the number 5_
or
Press the DOWN arrow pad to
decrease the speed down to the
number 1,
4. Press the START pad.
Your new control has a cook and hold
feature for timed cooking only that wilt
keep hot cooked foods warm up to 3
hours after the timed cooking is
finished. To activate this feature:
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF
I5