Oven Control - Kenmore 911.95579 Owner's Manual

OFERAT#ON
OvenControl,Clock, and Timer
f
%%I
@
..... FR_'I'B:J "_'00_
OFF
0 * 4OO''"
Your new range CLOCK, TRMER and OVEN operations are simple and easy
to understand.
The HOUR/MIH arrow pads allow
you to set the exact time you need.
The display in the center of your
control will show:
t. The time of day CLOCK.
2. The amount of time you choose
when using the TIIMI_R
3. The temperature selection as you
turn the oven control knob.
Your new control has the special
feature of blacking out the display
(have nothing showing in the display).
To activate this feature:
If the time of day is showing in the
display, press the CLOCK pad once.
To bring back the display from the
time of day black-out, press the
CLOCK pad twice.
If the display flashes an "F" followed
by a number and beeps continuously,
you have a function error code. Note
the number after the "F'. Turn the
oven control knob to the OFF
position. Allow the oven to cool for
about 1 hour and retry the oven
operation. If the problem repeats call
for service. Advise the technician
what the flashing code was.
When the power to your range is
turned on for the first time, the display
will flash the time when the power
was turned off, You can set the clock
at this point, or press the clock pad to
stop the flashing.
As a safety feature, this oven wilt
automatically shut off if it has been
left on for more than 12 hours. This
feature can be disabled. See page 13.
12