Self-Cleaning Cycle; Cleaning - Kenmore 911.95579 Owner's Manual

CARE Aft# NIN6
Self-Cleaning Cycle
1, For best results, follow the steps in
PR_=PARUHG YOUR OVEN.
2. Slide the handle to the right. Do not
force the handle.
3, Turn the oven control knob to
"CLEAN". The "CLEAN",
"AUTOMA'IraC OVEN", "COOK
TIIME", and "OVEN OH"
indicator lights will glow.
4, The handle will lock when high
temperatures are reached inside
the oven.
5, The clean cycle lasts 4 hours and
20 minutes. This includes a cool
down time. You may change this
clean time from 3 hours up to 5
hours and 59 minutes by pressing
the HOUR/_ilItN UP and/or
DOWN arrow pads, while the
colon is flashing.
When the clean cycle has started, you
may press the CLOCK pad to return
the display to the time of day. By
pressing the COOK TIME pad you
can return to the remaining clean time.
6, When the cycle is finished, the
"OVEN OH" and "CLEAN"
indicator lights will flash until the
oven control knob is turned to the
off position.
7, When the temperature has cooled,
the door handle will easily slide to
the left.
tm
,1
For best results, follow the steps
in PRI_PARIIHG YOUR OVEN.
Slide the handle to the right. Do
not force the handle.
3, Turn the oven control knob to
"CLEAN". The '_CLEAI_" and
"OVEH ON" indicator lights
will glow.
4, To delay the start of the clean
cycle press the START T_MI_
ON/OFF pad.
5, Press the HOUR/M_H UP and/or
DO_'NH arrow pads to set the time
of day you want the oven to start
cleaning automatically. The
"OVEH OH" indicator light is off
until the start time is reached.
a
When the cycle is finished the
"OVe:H OH" and "CLe=AH"
indicator lights will flash. Turn the
oven control knob to the off
position and unlock the door.
Turn the oven control knob to the off
position. Wait (approx. 1 hour) before
attempting to open the door. The indi-
cator light will not blink if the cycle is
interrupted.
If any white spots remain, wipe with a
damp cloth or sponge, or scrub them
with a soap-filled steel wool pad and
rinse thoroughly.
2O