Kenmore 116.20812 Owner's Manual page 7

CANISTER
1. Open the canister hood.
2. Check to see that the dust bag is properly
installed, See BAG CHANGING for instruc-
tions,
3. Check to see that the motor safety filter is
properly installed, See MOTOR SAFETY FIL-
TER CLEANING for instructions.
HOOD AND COVER
It is normal for the canister hood and cover
to come off when opened further than need-
ed, Line up the hinge slots, insert them, and
close the hood and!or cover to replace ito
Never open canister hood with the
cover open. This will help to prevent
damage from occurring to the
canister hood andlor cover.
Storage
HOSE
1. Line up the
hose latch tab
and notch in can-
ister hood and
insert hose into
canister until it
snaps in placer
To remove: Lift
hose latch tab
upward and pull
up on hose,
Handle
Handle
Handle
Quick
Release
(Some
Models)
Hos e
Latch
Tab
2. Insert handle
into wand until
lock button
snaps in place,
Be sure hose
is not twisted.
To remove:
Press handle
quick release
button and pull
up on handler
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage, Store hose in a loosely coiled
position so the hose covering is not stressed.
Hose
Latch Tab
Cover
E_ctronic
Bag/Hose
Check
Hood
Release
DustBag
7