Kenmore 116.20812 Owner's Manual page 19

wAR.m.G
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
,,, .........,, _............
TO CHECK AGITATOR
ASSEMBLY
When brushes
___ are worn to the
level of the base
support bars,
replace the
agitator
assembly.
Base Support Bars
I
TO REPLACE AGITATOR
ASSEMBLY
1. Remove Power-Mate ® cover, agitator
cover, belt and agitator assembly. See "To
Remove Belt" in BELT CHANGING AND
AGITATOR CLEANINGo
2. Remove end caps, washers, screws, end
brush, and brush sprocket pieces from ends
of old agitator assembly
3. Reassemble agitator assembly. To line up
screw holes in dowel, sprocket and end
brush, be sure all of the brush sprocket
pieces align properly_ See AGITATOR
ASSEMBLY_
4. Reinstall belt, agitator assembly, agitator
cover and Power-Mate ®cover. See "To
replace belt" in BELT CHANGING AND
AGITATOR CLEANING,
End
Cap Agitator Unit
End
Brush End
rT
Screw
Washer
Brush Sprocket
19