Handle Assembly - Kenmore 116.32721 Use & Care Manual

Beforeassembling vacuum, c heckthe
PACKING LISTon the coverof the separate
RepairPartsList,Usethis list to verifythat
youhavereceived allthe components of
yournewKenmore vacuum.
Electrical Shock Hazard
Do not plug into the electrical sup-
ply until the assembly is complete.
Failure to do so could result in elec-
trical shock or injury.
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum.
Position the handle as shown in the iliustra-
tion below
While holding the power cord out of the way,
slide the handle into the opening at the top
of the vacuum
Handle
Handle
Screw
Hole
Insert the screw so it passes through the
handle into the vacuum°
Begin to tighten the screw with your fingers.
It may be necessary to adjust the handle
slightly.