Kenmore 116.32721 Use & Care Manual page 21

Table of Contents

Advertisement

Available languages

Available languages

Review this chart to find do-it-yourself
solutions for minor performance
problems. Any service
needed, other than those described
in this owner's manual, should be performed
at a Sears
service center.
WARNING
Electrical Shock Hazard
Disconnect
electrical
supply before servicing
or cleaning the unit. Failure
to do so could result in electrical
shock
or personal
injury.
Cleaner won't run.
Poor job of dirt pick-up.
1. Unplugged at wal!outlet
2. Tripped circuit breaker/blown fuse
at household service panel.
3. Onfoff switch not turned on.
4. Thermal protectortripped
1. Full or clogged dust bin,
2. Wrong pile height setting
3. Worn agitator
4. Clogged nozzte or dust bin port
5o Clogged hose.
6. Hole in hose
7. Brokenfmisplaced belt,
8. Hose not inserted fully
9. Motor protection system aclivated
t0. Dirty filters,
1,
Plug in firmly, push onloff switch to on.
2.
Reset circuit breaker or replace fuse.
3.
Push on/off swttch to on
4.
Resel Ihermal protector, (page 1t)
1,
Clean dust bin, (pages 13, 14)
2.
Adjust setting, (page 7).
3.
Replace agitator, (page 20),
4.
Check CLOG REMOVAL, (page I8),,
5.
Check for clogs, (page 18)
6.
Replace hose
7.
Replacelfix belt, (pages 16, 17)
8.
Insert hose fully, (page 6)
9.
Check for clogs, (page t8)
t0.
Cleantchange fillers, (page 15)
Cleaner picks up
1. Wrong pile height setting
1.
Adjust setting, (page 7)
moveable rugs or
pushes too hard.
Light won't work.
1. Burned out Ilght bulb
1,
Change light bulb, (page 19)
Agitator does not turn.
1. Broken belt
1.
Replace belt, (pages 16, 17).
I.
Full or cloggeddust bin
2o Dirty filters
3. Clogged airflow passage
4, Certain altachmenl
tools.
Performance Indicator,
some models, is red.
Air flow restricted
with attachment use.
Sound changes.
1. Attachment usa restricts air flow
2. New carpet fuzz clogged air path
1o Clean dust bin, (pages 13, t4)
2.
Cleanlchange fillers, (page t5)
3.
Clear clog from airflow passage,
(page 18)
4.
This is normal Light should go off
when tool is remove&
1,
Check ATTACHMENTS, (page 9).
2.
Check CLOG REMOVAL and clean
hose, (page 18)
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

116.32720a116.32720

Table of Contents