Chapter 3 User Interface Setting; M+ Key Action; Pre-Set Tare - Excell Counting Scale User Manual

EXCELL PRECISION CO., LTD

CHAPTER 3 USER INTERFACE SETTING

3-1 M+ KEY ACTION

Press Z then
Weight
Press 0 , 1
0 =
When M+ key is pressed, the display will show the totalised value. Then, the
scale will count back to zero after 3 seconds.
1 =
When M+ key is pressed, the display will show the totalised value. Then, the
scale will count back to zero when the CE key is pressed.
When M+ key is pressed, the beeper only will sound and the display won 't
2 =
show the totalised value.
To exit and save the entry, press the

3-2 PRE-SET TARE

Press Z then
Weight
Press 0 or
0 =
Pre-set Tare function is not available when there is an object on the scale.
1 =
Pre-set Tare function is available when there is an object on the scale.
To exit and save the entry, press the
Counting
1 twice.
Unit Weight
or 2 to select the required mode
1 followed by
Unit Weight
1 to select the required mode
.
•
key
2
•
key
21
Quantity
X
Quantity
X
ZSME200000003