Frigidaire FN31LPDC Use & Care Manual page 7

Attaching Grill Head to Cart
1. While keeping the Grill on the foam base
lean it onto its back. (be sure to hold the
hood shut when doing this.) With the Grill
on its back, loosen all 4 bolts on the
bottom side of the Grill, but do not
relnove.(See Fig. 5)
.
.
Using 2 self, tapping hex head screws,
attach the magnetic door catch in the 2 holes
in the bottom of'the grill. (See Fig. 6)
ttave someone help you pick up the grill
and set it on the top of the cart, with the front
of" the grill above the door opening. Make
sure the 4 bolt heads f;all through the large
opening of" the key hole slots in the top of" the
cart. Slide the grill head backward, so the
bolts are resting in the small opening of the
key hole slots. Tighten the bolts securely.
Be sure not to over tighten and strip the
bolts. Next insert 4 hex head screws into grill
bottom through cart. (See Fig. 7)
Note: This is a very heavy step that requires
two individuals to complete.
Installing the Cart Door
.
While holding the door line up the bottom
hole on the door with the bolt sticking up
through base of cart. Next place a nylon
bushing onto the top pin, then depress the pin
and insert into the hole in the bottom of'the
grill. (See Fig. 8)
Screw hole lbr
magnetic catch
Fig. 5
Fig. 6
Fig. 7
Fig. 8