Table of Contents
Advertisement
36
EN FEATURESFORRECORDING
I LEDLight
LED Light can be used to
brighten
the subject
in the dark
place during
video
recording
or
D.S.C. shooting.
1 Press LIGHT
repeatedly
to
change
the setting.
LED Light
OFF: Turns off the light.
ON:The
light is on always. (;'_ appears.)
AUTO: The light turns on automatically
when
dark. (_'_.& appears.)
2
Press the Recording
Start/Stop
Button
to
start video
recording
or SNAPSHOT
to shoot
a
still image.
NOTES:
• Be careful not to point the LED Light directly to eyes.
• If the light does not reach the subject when the
LED Light setting is ON", the Night-Alive function
will be activated,
and makes it possible to shoot
the subject brighter.
• There is a difference
in the brightness
of the
images shot between the center area which is
illuminated
by the LED Light and the surrounding
areas (which will be darker).
• Since subjects are shot at a reduced shutter
speed when the LED Light setting is ON", they
will appear slightly blurred.
I LiveSlow
This feature
is useful for recording
or playing
back precious
or hard-to-see
moments
at a slow
speed. Sound
is recorded
and played
back in
real time.
1
Set the VIDEO/MEMORY
Switch
to "VIDEO".
2 Set the recording
mode to'1_]".
(
pg. 15)
3 Set "SNAP/SLOW"
to "SLOW".
(
pg. 31,33)
The Live Slow indicator"_"
appears.
4
Press SNAPSHOT
(SLOW)
during
recording
or playback.
• The moving
pictures
are divided
into four
frames. They are recorded
or played
back for
1.5 seconds,
and then normal
recording
or
playback
resumes.
• This feature
is effective
when the recording
mode selection
is set to both "n"
or "[_".
NOTE:
Available only when the VIDEO/MEMORY
Switch is
set to VIDEO",
I Wide Mode
This camcorder
allows
you to choose
the type of
image output
format
for video
recording.
1 Set the Power Switch
to "REC".
2
Press 16:9 button
repeatedly
to choose
your
selection.
[4:3]:
Records
with no change
in the screen
ratio. For playback
on a TV with a normal
screen
ratio. When using this mode on a TV with a
normal
screen ratio, refer to your TV's instruction
manual.
16:9: For playback
on TVs with an aspect
ratio of
16:9. Naturally
expands
the image to fit the
screen without
distortion.
The "16:9" indicator
appears.
When
using this mode,
refer to your
wide-screen
TV's instruction
manual.
During
playback/recording
on 4:3 TVs/LCD
monitor/
viewfinder,
the image
is elongated
vertically.
[ ] = Factory-preset
NOTE:
Available only when the ViDEO/MEMORY
Switch is
set to "VIDEO".
Advertisement
Table of Contents
