Table of Contents
Advertisement
44 EN EgXTXNG
I Connection T oA Personal C omputer
[A] Using
USB cable
[B] Using
DV cable
OR
= Core filter
USB cable
(provided)
To USB
connector
= Core filter
DV cable
(optional)
= Core filter
To DV connector
PC
PC with DV connector
When
connecting
the camcorder
to a PC
using a DV cable, make
sure to follow the
procedure
below. Connecting
the cable
incorrectly
may cause malfunctions
to the
camcorder
and/or the PC.
• Connect the DV cable first to the PC, and then
to the camcorder.
• Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
[A] Using USB cable
It is possible
to transfer
still images
stored
on a
memory
card to a PC.
[B] Using DV cable
It is also possible
to transfer
still/moving
images
to a PC with a DV connector
by using the
provided
software,
software
equipped
with the
PC or commercially
available
software.
If you are using a Windows ® XP, you can use
Windows ® Messenger
to conduct
video
conferences
over the Internet,
using a
camcorder.
For details,
refer to the help for the
Windows e_Messenger.
NOTES:
• Refer to "SOFTWARE
INSTALLATION
AND PC
CONNECTION
GUIDE" for the bundled software
and drivers.
• It is recommended
to use the AC Adapter
as
the power supply instead of the battery pack.
(:
pg. 15)
• Never connect the USB cable and the DV
cable simultaneously
to the camcorder.
Connect only the cable you wish to use to the
camcorder.
• When using a DV cable, be sure to use the
optional JVC VC-VDV206U
or VC-VDV204U
DV
cable depending
on the type of DV connector
(4 or 6 pins) on the PC.
• If the PC connected
to the camcorder
via the USB
cable is not powered, the camcorder
does not
enter the USB mode.
• The date/time
information
cannot be captured into
the PC.
• Refer to the instruction
manuals of the PC and
Software.
• The still images can also be transferred to a PC
with a DV connector-equipped
capture board.
• The system may not work properly depending
on
the PC or capture board you are using.
"USB" and/or"
_m,_.
"appears
on the LCD
monitor
while the PC is accessing
data in the
camcorder
or the camcorder
is transferring
a
file to the PC.
NEVER
disconnect
the USB cable
while
" _.,=.,_
"is
displayed
on the LCD
monitor
since
this
can result
in product
damage.
Advertisement
Table of Contents
