Connecting The Camera To The Pc - JVC GZ-MG365U Instructions Manual

4 Select the desired language and
click [OK].
Preparation:
Close the LCD monitor to turn off the camera.
5 Click [Yes].
The software installation starts.
.... 2 .........
Click [Finish],
USB Port
DC Jack
USB Cable
AC Adapter
To AC Outlet
Iii When installation is completed
The installed software is displayed in [All
Programs].
The backup destination folder [MyWorks]
for files is created on the hard disk drive
that has the most free space.
• Never disconnect the USB cable while the
access/charge lamp on the camera lights or
blinks.
® Do not turn off the camera when the USB
cable is connected, to prevent malfunctions
of the PC.
® Connect the camera directly to the USB jack
on the PC, not through a hub.
• Do not use an extension USB cable.
• Saving the wrong kinds of files in a
recording medium or deleting files or
folders from a recording medium can cause
problems with the operation of the camera.
When it is necessary to delete a file from
a recording medium, delete it through the
camera. Also, do not move or rename
folders and files in the medium on PC.
25