Table of Contents
Advertisement
Warning indications
mm
® Displays the remaining battery power.
High
Exhausted
• As the battery power comes close to nil, the battery
indicator blinks. When the battery power is exhausted,
power turns off automatically.
® Appears when the date/time
is not set.
® The built-in clock's rechargeable
lithium battery is
discharged,
so the previously set date/time
is erased.
Connect the camera to an AC outlet using the AC adapter
for over 24 hours to charge the clock's lithium battery. Then
set the date/time.
® Appears for 5 seconds after power is turned on in recording
mode if the lens cover is closed or when it is dark.
• Perform clean up to restore the capacity of the recording media.
• Turn off the camera. Remove the microSD card and insert it
again. Turn on the camera after inserting the microSD card.
If the error message appears
again, replace the card with
one that is certified to operate correctly.
• It is also recommended
to run check disc regularly on the
PC, providing that there is no data on the hard disk of the
camera.
® The video management
file is broken. Recovery
is required
to record or play back video files. Select [YES], then touch
the OK button to recover the video management
file.
• Appears when the event information
cannot be read.
Register the file to an event.
• The writing speed of recording medium is slow, or the
recording medium is corrupted. Use a microSD card that is
guaranteed
to operate correctly.
® The hard disk was subjected to vibrations
or jolts. Be careful
not to subject the hard disk to vibrations
or jolts.
® Appears when the recording medium is full and recording
is not possible.
Delete unnecessary
files, or replace the
microSD card.
® Appears when an incompatible
USB device is connected
to
the camera.
® Appears when a DVD burner that is switched off is
connected.
If you want to use the DVD burner, switch the
power on.
• To turn on the camera again, close the LCD monitor and
open it again.
14
14
2O
35
Advertisement
Table of Contents
