Table of Contents
Advertisement
File Backup
on a Windows ®PC (Continued)
!11When
you
have finished
operation
Always
follow the procedures
below when
disconnecting
the camera,
or turning
off
the power of the camera/PC.
Failing to do so may cause damage
to the
camera
and PC.
1 ) Confirm
that the access/charge
lamp on
the camera
does not light or blink. (If the
access/charge
lamp lights or blinks, wait
until it is turned
off before
proceeding.)
2) Double-click
the [Safely
Remove
Hardware]
or [Unplug
or Eject
Hardware]
icon in the status bar.
3) Select
[USB Mass Storage
Device]
or
[USB Disk], and then click [Stop].
4) Click [OK].
5) Disconnect
the USB cable.
6) Turn off the camera
and PC.
"1
!
Open
the
LCB
monitor
to turn
on the
camera,
2 On the camera, press the DIRECT
BACK UP button.
Although a dialog box appears on the PC,
you do not need to use it. File copy starts
automatically.
When
the progress
bar disappears,
the
process
is complete.
This method
uses the software
on the
provided
CD-ROM
to back up files onto your
PC.
Video files that have never been backed
up
onto the connected
PC are automatically
selected
from the back up history
and backed
up.
If you could not install the software,
turn to
page 27 for details
of how to back up your
files without
using this software.
Preparation:
® Install the software
from the provided
CD-
ROM. (_,-_ pg. 24)
• Connect
the camera
to the PC with the USB
cable. (_-. pg. 25)
m
When
backup
is performed,
folders
for each
medium
(HDD or microSD)
are created
in the
[MyWorks]
folder (:-. pg. 25), and the files are
backed
up inside
those folders.
(If backup
is
performed
from more than one camera
HDD,
individual
HDD folders
are created.)
i File Backup
from a Specified
Media
i
Preparation:
® Install the software
from the provided
CD-
ROM
(,_J pg. 24)
oConnect
the camera
to the PC with the USB
cable. (u
pg. 25)
"1
!
Open
the
LCB
monitor
to turn
on the
camera.
On the camera, select [BACK UP].
26
Advertisement
Table of Contents
