Table of Contents
Advertisement
Troubleshooting
The camera
is a microcomputer-controlled
device.
External
noise and interference
(from
aTV,
a radio, etc.) might
prevent
it from
functioning
properly.
The following
phenomena
are not
malfunctions.
®The camera
heats
up when
it is used for a
long time.
• The battery
heats
up during
charging.
®When
playing back a video file, the
image stops
momentarily
or the sound is
interrupted
at junctions
between
scenes.
• To solve the problem,
first follow the
instructions
below.
® If the problem
is not solved,
reset the
camera.
(_" below)
• If the problem
persists,
please
consult your
nearest
JVC dealer.
I
To reset the camera
1) Close the LCD monitor
to turn off the
camera
and remove the power supply
(battery
pack or AC adapter)
from the
camera,
then reattach
it.
2) Select
[FACTORY
PRESET]
from the
MENU.
iiiiiiiiiiiiiiii!iiiiiiiii
• Connect the AC adapter securely.
14
• Detach the battery pack once again and reattach it firmly.
14
• Replace the dead battery with a fully charged one.
• Make sure to use the camera under appropriate
operating
36
temperatures.
• The battery is worn out and needs to be replaced. Please
purchase
a new one.
• Charging may stop in places subject to extremely high/low
-
temperatures
to protect the battery. It is recommended
to charge it in places with a temperature
of 10°C to 35°C
(50°F to 95°F).
• When the battery is already fully charged, the lamp does
15
not light. Check the remaining
battery power.
• Recording medium is full. Delete unnecessary
files or
20
replace the rnicroSD card.
• Select the recording medium properly.
®Touch the DISP button once.
13
®The temperature
of the camera is increasing.
If the
camera continues to heat up, recording may be stopped
to protect the recording
medium. In this case. turn off the
power, and then wait until the camera cools down.
® Change the settings in [ZOOM].
® Digital zoom is not available in the still image recording
mode.
33
Advertisement
Table of Contents
