Table of Contents
Advertisement
f*
Make a backup of important recorded
data
JVC will not be responsible
for any lost data. It is recommended
to copy your important
recorded
data to a DVD or other recording
media for storage.
(_
pg. 22)
Make a trial recording
Before
tile actual
recording
of important
data, make a trial recording
and play back the
recorded
data to check that the video and sound
have been recorded
correctly.
Reset the camera if it does not operate correctly
This camera
uses a microcomputer.
Factors such as background
noise and interference
can prevent
it from operating
correctly.
If the camera
does not operate
correctly,
reset the
camera.
(_-. pg. 33)
Precautions on handling batteries
® Be sure to use the JVC BN-VF808U/VF815U/VF823U
battery
packs.
® If the camera
is subjected
to electrostatic
discharge,
turn the power off before using it
again.
If a malfunction
occurs, stop using the camera immediately
and consult your local JVC dealer
• If a problem
occurs
when using the microSD
card, take the card together
with tile
camera for repair. If one of them is not included,
the cause
of the malfunction
cannot be
diagnosed,
and the camera
cannot be repaired.
® Recorded
data may be erased
while the camera
is being repaired
or inspected.
Back up
all data before requesting
repairs
or inspections.
Because the camera may be used for demonstration
in a shop,
the demonstration
mode is set to [ON] by default
To deactivate
the demonstration
mode,
set [DEMO
MODE]
to [OFF] from the MENU.
When connecting the camera to other devices using an
optional DV cable, make sure to follow the procedure below.
Connecting the cable incorrectly may cause malfunctions
to
the camera and/or other devices.*
= Connect
the DV cable first to the device,
and then to the camera.
® Connect
the DV cable (plugs)
correctly
according
to the shape of the DV connector.
* This does not apply to the GZ-MG330
model.
Advertisement
Table of Contents
