Table of Contents
Advertisement
Troubleshooting
(Continued)
__
m
® Set [FOCUS] to [AUTO].
® Clean the lens and check the focus again.
34
® The continuous
shooting speed will drop after repeated
continuous
shots, depending
on the recording
media, or
under certain recording conditions.
• Select the recording medium properly.
• To watch images on a TV. set the TV's input mode or
19
channel that is appropriate
for video playback.
• The temperature
of the camera is increasing. If the
camera continues
to heat up, playback may be stopped
to protect the recording medium. In this case. turn off the
power, and then wait until the camera cools down.
® Remove protection from the files and delete them.
21
® There is a large number of still images (approx. 1,000 or
20
more) stored in the recording medium. Copy the stored
files to other devices, and delete them from the recording
medium.
® Push the microSD card in a few more times.
® Another operation
is being attempted while a DVD burner
that is turned on is connected.
Turn off the camera
connected
to the DVD burner, or disconnect
the USB
cable.
• Touch the sensors with your finger. The sensors do not
6
function if you touch them with your finger nail or with
gl
Cleaning
Before
cleaning,
turn off the camera
and remove the battery
pack and AC adapter.
B!lTo clean the exterior
Wipe
gently with a soft cloth. If tile camera
is particularly
dirty, dip tile cloth into diluted
mild
soap and wring
it out well before wiping.Then
wipe again with a dry cloth.
Im To clean
the LCD monitor
Wipe
gently with a soft cloth. Be careful not to damage
the monitor.
B!lTo clean
the lens
Wipe
gently with lens cleaning
paper.
• Avoid using strong
cleaning
agents
such as benzine
or alcohol.
• Mold may form if the lens is left dirty.
® When
using a cleaner
or chemically
treated
cloth, refer to the cautions
for each product.
34
Advertisement
Table of Contents
