Advertisement
eaNi
Mbrea
i9 S St
Getting Started
(see pages
3 to 6)
Changing
the Scanning
Mode
• To enjoy the progressive
video picture,
connect
a TV with
the progressive
video
input using component
video
cord.
Daily Operations--Playback
(see pages
10 to 13
Listening
to the Radio:
• If you store a new station into an occupied
preset number,
the previously
stored station in that number
will be erased.
• When you unplug
the AC power
cord or if a power failure
occurs,
the preset stations
will be erased in a few days.
If
this happens,
preset the stations
again.
Playing
Back
a Disc:
• When using an 8 cm disc, place it on the inner circle of the
disc tray.
• On some DVD, SVCD,
or VCD discs, the actual
operations
may be different
from what is explained
in this
manual,
due m the programming
and disc strncture;
such
differences
are not a malfunction
of this System.
• When discs*
in more than one tray are loaded
on the disc
trays, they are played
in sequence
as follows:
Ex.:When
DISC 2 is selected:
DISC 2=>DISC
3=>DISC
4=0DISC
5=:;>DISC 1
(then stops)
* When no disc is loaded on the tray, that disc number
is
skipped.
• You can exchange
discs while playing
or selecting
auother
disc.
• Some DVD Audio discs prohibit
downmixed
output.
When you play back such a disc, "LR ONLY"
appears
on
the display
and the System
plays back the left front and
right front signals.
• 3D Phonic
setting is also applied
to the optical
digital
output
signals
through
the DVD OPTICAL
DIGITAL
OUT terminal.
• When using Resume
on SVCD or VCD with PBC, the
playback
might start on a position
slightly
different
from
where
you have stopped.
• You can use Resume
only for the DVD/SVCD/VCD
except
for some discs--depending
how the disc is
programmed.
• For MP3&VMA/JPEG
playback...
This System
cannot
play "packet
write"
discs.
MP3/WMA/JPEG
discs are required
a longer readout
time than regular
CDs. (It depends
on the complexity
of
the group/file
configuration.)
- Some MP3/WMA/JPEG
files cannot be played back and
will be skipped.
This result from their recording
processes
and conditions.
- When making
MP3/WMA
discs, use ISO 9660 Level
l
or Level 2 for the disc format.
- This System
can play back MP3/WMA
files with the
extension
code <.mp3>,
<.wma>
or <.jpg>
(regardless
of
the letter case_pper/lower).
- It is recommended
that you make each MP3 file at a
sampling
rate of 44.1 kHz and at bit rate of 128 kbps,
This System
cannot play back files made at bit rate of
less than 64 kbps.
This System
can recognize
the total of 1000 tracks and of
99 gronps
(each group can contain
up to 150 tracks).
Those exceeding
the maximum
number
cannot
be
recognized,
Daily Operations--Sound&Other Adjustments
(see pages
14 to 17)
Adjusting
the Volume:
• Be sure to turn down
the volume
before connecting
or
putting
the headphones.
Adjusting
the Sound:
• This function
also affects the souud through
the
headphones.
Setting
the clock:
• "AM
12:00" will flash on the display
until you set the
clock.
• The clock may gain or lose 1 to 2 minutes
per month.
If this
happeus,
reset the clock.
UniqueDVD/VCDOperations
(see pages
18 to 20)
• During
slow-motkm
playback,
no sound will be
reproduced.
• One touch replay function
works only withiu the same title
though
it works between
chapters.
• While zoomed
in, the picture
may look coarse.
AdvancedDiscOperations
(see pages
21 to 23)
Programming
the Playing
Order--Program
Play:
• If you try to program
a 100th track, "MEM
FULL (memory
full)" appears
on the display.
• While programming
steps...
Your entry will be ignored
if you have tried to program
an
item number
that does not exist on the disc (for example,
selecting
track 14 on a disc that only has 12 tracks).
• You cannot use Program
Play and Random
Play for JPEG
discs.
• You cannot eject tray while
in Program
Play.
Playing
at Random--Random
Play:
• The I-,4_1button does not work for skipping chapters or tracks,
but only work for going back to the beginning
of the cnrrent
cbapter or track.
37
Advertisement
